ADAM2 Revision 0.22.02 (C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved. (C) Copyright 2003 Telogy Networks, Inc. Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz] Memory optimization Complete! Adam2_AR7RD > Press any key to abort OS load, or wait 5 seconds for OS to boot... Launching kernel decompressor. Starting LZMA Uncompression Algorithm. Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor Pavlov. Compressed file is LZMA format. Kernel decompressor was successful ... launching kernel. LINUX started... Config serial console: ttyS0,38400 CPU revision is: 00018448 Primary instruction cache 16kb, linesize 16 bytes (4 ways) Primary data cache 16kb, linesize 16 bytes (4 ways) Number of TLB entries 16. Linux version 2.4.17_mvl21-malta-mips_fp_le (Jenny@products.adsl) (gcc version 2.95.3 20010315 (release/MontaVista)) #63 Fri Aug 13 13:13:17 CST 2004 Determined physical RAM map: memory: 14000000 @ 00000000 (reserved) memory: 00020000 @ 14000000 (ROM data) memory: 00fe0000 @ 14020000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: the pacing pre-scalar has been set as 600. calculating r4koff... 000b71b0(750000) CPU frequency 150.00 MHz Calibrating delay loop... 149.91 BogoMIPS Freeing Adam2 reserved memory [0x14001000,0x0001f000] Memory: 14568k/16384k available (1345k kernel code, 1816k reserved, 111k data, 48k init) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Disabling the Out Of Memory Killer devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 32 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xa8610e00 (irq = 15) is a 16550A ttyS01 at 0xa8610f00 (irq = 16) is a 16550A block: 64 slots per queue, batch=16 PPP generic driver version 2.4.1 avalanche flash device: 0x400000 at 0x10000000. Amd/Fujitsu Extended Query Table v1.0 at 0x0041 Flash Vender ID=1f Physically mapped flash: JEDEC Device ID is 0xC8. Assuming broken CFI table. Physically mapped flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 Looking for mtd device :mtd0: Found a mtd0 image (0xa0000), with size (0x350000). Looking for mtd device :mtd1: Found a mtd1 image (0x10000), with size (0x90000). Looking for mtd device :mtd2: Found a mtd2 image (0x0), with size (0x10000). Looking for mtd device :mtd3: Found a mtd3 image (0x3f0000), with size (0x10000). Looking for mtd device :mtd4: Creating 4 MTD partitions on "Physically mapped flash": 0x000a0000-0x003f0000 : "mtd0" 0x00010000-0x000a0000 : "mtd1" 0x00000000-0x00010000 : "mtd2" 0x003f0000-0x00400000 : "mtd3" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 48k freed serial console detected. Disabling virtual terminals. console=/dev/tts/0 init started: BusyBox v0.61.pre (2004.08.13-05:17+0000) multi-call binary Starting pid 9, console /dev/tts/0: '/etc/init.d/rcS' Standard Configuration File proc write:Calling Configuration Number of State module = 1 STATE = 1 STATE = 2 STATE = 3 STATE = 4 module = 2 STATE = 1 STATE = 2 module = 5 STATE = 1 STATE = 2 STATE = 3 module = 6 STATE = 1 STATE = 2 STATE = 3 module = 4 STATE = 1 STATE = 2 STATE = 3 module = 9 STATE = 1 STATE = 2 STATE = 3 STATE = 4 STATE = 5 Elements = 20 Total Length = 164 Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/atm/tiatm.o registered device TI Avalanche SAR Initializing DSL interface enable showtime margin monitor. eoc rev=330 Texas Instruments ATM driver: version:[4.02.01.50] Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/net/bridge/bridge.o NET4: Ethernet Bridge 008 for NET4.0 Waiting for enter to start '/bin/sh' (pid 37, terminal /dev/tts/0) Please press Enter to activate this console. logic: /proc/led_mod/ar7reset: [0] Sep 8 12:00:05 cm_monitor: Monitor Starting tree_parse_file: /etc/sysdef.xml tree_parse_config:/dev/ticfg Logger: Setting remote_loglevel=notice (5) Setting loglevel=notice (5) ===>bridge set ZIPB_MODE deactive in init time_init: syncmode:0, daylight:2, timezone:46 Sep 8 12:00:06 cfgmgr(pppoe0)> Valid Configuration Tree rfc2684_start(nas0): ip_tables: (c)2000 Netfilter core team ip_conntrack version 2.0 (128 buckets, 1024 max) - 364 bytes per conntrack Sep 8 12:00:11 cfgmgr(fdb)> Firewall NAT service started AutoPVC feature is activated rfc2684_load(nas0): 1.32 /sbin/ifconfig nas0 hw ether 00:0F:3D:**:**:** ===>bridge ZIPB disable ZIPB............ FLAG: 2 notify kernel event successful! Sep 8 12:00:12 cfgmgr(bridge)> Bridge Created: br0 tiwlan_drv_init : ***(JustinTest)***: APDK5.5.20 Notice - Using local tiwlan.o! tiwlan_drv_init : tiwlan_drv_init() Copying of 10240000 bytes took: d125 124478 us d150 103731 us TNETD73XX_VLYNQ0_BASE : 0xa4000000, PumaVlBase[pDev->dev_idx - 1] : 0x8611800 reset_acx111_vlynq() -- VLYNQ_RESET_ASSERT device eth0 entered promiscuous mode br0: port 1(eth0) entering learning state Sep 8 12:00:12 cfgmgr(bridge)> Bridge Interface Added: eth0 reset_acx111_vlynq() -- VLYNQ_RESET_DEASSERT VLYNQ_STS : 0x1000101 VLYNQ_STS : 0x1000101 reset_acx111_vlynq() -- VLYNQ_RESET_LINKESTABLISH, boosting clock VLYNQ_STS : 0x1000101 Initializing VLYNQ interrupts reset_acx111_vlynq() -- INITOK boardInitVlynqDriverAcx111() -- return code = 0, driver state = 2 Sep 8 12:00:13 pppd[277]> pppd 2.4.1 started by root, uid 0 tiwlan_drv_char_read : sending memory base: mem : 0xa4000000 [0x20000], reg : 0xa4040000 [0x2000] tiwlan_drv_char_write : Got SET result ! Algorithmics/MIPS FPU Emulator v1.5 tiwlan_drv_char_write : Got VLYNK enable !!! Sep 8 12:00:15 cfgmgr(sar)> DSL Carrier is down br0: port 1(eth0) entering forwarding state br0: topology change detected, propagating Got K2U control ptr device tiwlan0 entered promiscuous mode br0: port 2(tiwlan0) entering learning state Sep 8 12:00:24 cfgmgr(bridge)> Bridge Interface Added: tiwlan0 br0: port 2(tiwlan0) entering forwarding state br0: topology change detected, propagating