Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'default'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
Line: 23 - start of a new network block
scan_ssid=1 (0x1)
ssid - hexdump_ascii(len=7):
     62 61 73 65 64 6f 77                              basedow         
PSK (ASCII passphrase) - hexdump_ascii(len=19): [REMOVED]
priority=42 (0x2a)
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 42
   id=0 ssid='basedow'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:0f:66:5b:6b:e7
BROADCOM: wlioctl(eth1,164,len=4,val=0x7fff7ca0)
BROADCOM: wlioctl(eth1,133,len=4,val=0x7fff7ca4)
BROADCOM: wlioctl(eth1,165,len=4,val=0x7fff7ca0)
BROADCOM: wlioctl(eth1,134,len=4,val=0x7fff7ca4)
BROADCOM: wlioctl(eth1,122,len=6,val=0x7fff7c98)
BROADCOM: SET KEY[0] alg=0
BROADCOM: addr - hexdump(len=6): ff ff ff ff ff ff
BROADCOM: wlioctl(eth1,45,len=164,val=0x7fff7ba8)
BROADCOM: SET KEY[1] alg=0
BROADCOM: addr - hexdump(len=6): ff ff ff ff ff ff
BROADCOM: wlioctl(eth1,45,len=164,val=0x7fff7ba8)
BROADCOM: SET KEY[2] alg=0
BROADCOM: addr - hexdump(len=6): ff ff ff ff ff ff
BROADCOM: wlioctl(eth1,45,len=164,val=0x7fff7ba8)
BROADCOM: SET KEY[3] alg=0
BROADCOM: addr - hexdump(len=6): ff ff ff ff ff ff
BROADCOM: wlioctl(eth1,45,len=164,val=0x7fff7ba8)
BROADCOM: wlioctl(eth1,82,len=4,val=0x7fff7ca8)
BROADCOM: wlioctl(eth1,120,len=4,val=0x7fff7ca8)
Setting scan request: 0 sec 100000 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=7):
     62 61 73 65 64 6f 77                              basedow         
BROADCOM: wlioctl(eth1,50,len=36,val=0x7fff7c10)
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Scan timeout - try to get results
BROADCOM: wlioctl(eth1,51,len=8192,val=0x10001e60)
BROADCOM: AP IEs - hexdump(len=66): 00 07 62 61 73 65 64 6f 77 01 08 82 84 8b 96 24 30 48 6c 03 01 04 2a 01 00 2f 01 00 32 04 0c 12 18 60 dd 06 00 10 18 01 00 01 dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
BROADCOM: IE: id:0, len:7
BROADCOM: oui:626173
BROADCOM: IE: id:1, len:8
BROADCOM: oui:82848b
BROADCOM: IE: id:3, len:1
BROADCOM: IE: id:2a, len:1
BROADCOM: IE: id:2f, len:1
BROADCOM: IE: id:32, len:4
BROADCOM: oui:0c1218
BROADCOM: IE: id:dd, len:6
BROADCOM: oui:001018
BROADCOM: IE: id:dd, len:22
BROADCOM: oui:0050f2
Received 168 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 42
0: 00:0f:66:c7:87:3a ssid='basedow' wpa_ie_len=24 rsn_ie_len=0
   selected
Trying to associate with 00:0f:66:c7:87:3a (SSID='basedow' freq=2427 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
BROADCOM: wlioctl(eth1,82,len=4,val=0x7fff2c98)
BROADCOM: wlioctl(eth1,120,len=4,val=0x7fff2c98)
BROADCOM: wlioctl(eth1,134,len=4,val=0x7fff2c80)
BROADCOM: wlioctl(eth1,165,len=4,val=0x7fff2c84)
BROADCOM: wlioctl(eth1,42,len=4,val=0x7fff2c88)
BROADCOM: wlioctl(eth1,20,len=4,val=0x7fff2c8c)
BROADCOM: wlioctl(eth1,22,len=4,val=0x7fff2c90)
BROADCOM: wlioctl(eth1,43,len=4,val=0x7fff2c80)
BROADCOM: wlioctl(eth1,26,len=36,val=0x7fff2c58)
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RECEIVE EVENT - hexdump(len=64): 00 c0 9f 24 d1 7b 00 0f 66 c7 87 3a 00 32 aa aa 03 00 90 4c 99 99 02 01 00 00 00 00 00 0f 66 5b 00 0f 66 5b 6b e5 00 c0 dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
BROADCOM: ASSOC MESSAGE (left: 24)
BROADCOM: copying %d bytes into resp_ies - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
Association info event
req_ies - hexdump(len=0):
resp_ies - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
Association event - clear replay counter
BROADCOM: wlioctl(eth1,23,len=6,val=0x7fff5bf0)
Associated to a new BSS: BSSID=00:0f:66:c7:87:3a
No keys have been configured - skip key clearing
Associated with 00:0f:66:c7:87:3a
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=29 idleWhile=59
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=28 idleWhile=58
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=27 idleWhile=57
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=26 idleWhile=56
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=25 idleWhile=55
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=24 idleWhile=54
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=23 idleWhile=53
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=22 idleWhile=52
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=21 idleWhile=51
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=20 idleWhile=50
Authentication with 00:0f:66:c7:87:3a timed out.
BROADCOM: wlioctl(eth1,52,len=0,val=(nil))
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
BROADCOM: wlioctl(eth1,50,len=36,val=0x7fff7c10)
Signal 2 received - terminating
BROADCOM: wlioctl(eth1,201,len=12,val=0x7fff7cf0)
BROADCOM: wlioctl cmd=201 res=-1
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0