ADAM2 Revision 0.22.02 (C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved. (C) Copyright 2003 Telogy Networks, Inc. Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz] Memory optimization Complete! Adam2_AR7RD > Press any key to abort OS load, or wait 5 seconds for OS to boot... Adam2_AR7RD > Erasing from 0xb0010000 to 0xb03f0000. FlashEraseBlock(b0010000,b03effff); .............................................................. Erase Successful. .......................... Adam2_AR7RD > go Launching kernel decompressor. Kernel decompressor was successful ... launching kernel. LINUX started... CPU revision is: 00018448 Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. Primary data cache 16kB, 4-way, linesize 16 bytes. Linux version 2.4.30 (georg@zapp) (gcc version 3.4.4) #3 Sun Jul 24 01:25:04 CEST 2005 Determined physical RAM map: memory: 14000000 @ 00000000 (reserved) memory: 00020000 @ 14000000 (ROM data) memory: 00fe0000 @ 14020000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,38400 calculating r4koff... 000b71b0(750000) CPU frequency 150.00 MHz Calibrating delay loop... 149.91 BogoMIPS Memory: 14424k/16384k available (1335k kernel code, 1960k reserved, 92k data, 72k init) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... available. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xa8610e00 (irq = 15) is a 16550A ttyS01 at 0xa8610e00 (irq = 16) is a 16550A Vlynq CONFIG_AR7_VLYNQ_PORTS=2 Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0 Vlynq instance:0 Link UP Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0 VLYNQ 1 : init failed Software Watchdog Timer: 0.05, timer margin: 60 sec ar7 flash device: 0x400000 at 0x10000000. Amd/Fujitsu Extended Query Table v1.0 at 0x0041 Physically mapped flash: JEDEC Device ID is 0xC8. Assuming broken CFI table. Physically mapped flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. Parsing ADAM2 partition map... Looking for mtd device :mtd0: Found a mtd0 image (0xa0000), with size (0x350000). Assuming default rootfs offset of 0xa0000 Looking for mtd device :mtd1: Found a mtd1 image (0x10000), with size (0x3e0000). Looking for mtd device :mtd2: Found a mtd2 image (0x0), with size (0x10000). Assuming adam2 size of 0x10000 Looking for mtd device :mtd3: Found a mtd3 image (0x3f0000), with size (0x10000). Looking for mtd device :mtd4: Setting new rootfs offset to 000b0dcd Squashfs detected (size = 0x000f20bc) Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00010000 : "adam2" 0x00010000-0x003f0000 : "linux" 0x000b0dcd-0x001b0000 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only 0x003f0000-0x00400000 : "config" 0x001b0000-0x003f0000 : "OpenWrt" Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 72k freed Algorithmics/MIPS FPU Emulator v1.5 insmod: diag.o: no module by that name found /etc/preinit: 5: cannot create /proc/sys/diag: Directory nonexistent cat: /proc/sys/reset: No such file or directory /etc/preinit: 14: nvram: not found [: 1: unknown operand /sbin/mount_root: 24: nvram: not found Unlocking OpenWrt ... mount: Mounting none on /proc failed: Device or resource busy mount: Mounting none on /dev failed: Device or resource busy umount: /rom/proc: No such file or directory umount: /rom/dev: No such file or directory init started: BusyBox v1.00 (2005.07.22-13:50+0000) multi-call binary /etc/init.d/rcS: 2: nvram: not found Please press Enter to activate this console. jffs2.bbc: SIZE compression mode activated. Using the MAC with external PHY Cpmac driver is allocating buffer memory at init time. Using the MAC with external PHY Error getting mac from Boot enviroment for eth0 Using default mac address: 08.00.28.32.06.02 Use Bootloader command: setenv xx.xx.xx.xx.xx.xx to set mac address Cpmac driver Disable TX complete interrupt setting threshold to 20. registered device TI Avalanche SAR Initializing DSL interface size=8800 size=17632 size=6656 size=13248 enable showtime margin monitor. Texas Instruments ATM driver: version:[4.02.04.00] device eth0 entered promiscuous mode BusyBox v1.00 (2005.07.22-13:50+0000) Built-in shell (ash) Enter 'help' for a list of built- in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M root@OpenWrt:/# uname -a Linux OpenWrt 2.4.30 #3 Sun Jul 24 01:25:04 CEST 2005 mips unknown root@OpenWrt:/#